Qwiic Button with LED
Tactile button with integrated LED indicator. Provides physical input and visual feedback.
Say it to PAL
“Do something when I press the button.”
The code PAL writes
p.onSensorChange('qwiic-button', 'button', (state) => {
if (state === 1) p.log('Button pressed!');
});
await p.waitUntilStopped();When to pick it
Single illuminated button with LED. Good for one-action triggers or indicators. Simpler than Modulino Buttons if you only need one button.
About it
A momentary tactile button with a built-in LED that can indicate status or provide visual acknowledgment. Available with a red or a green LED. The LED brightness is adjustable via I2C. Commonly used for user confirmation, alarm acknowledgment, or simple control inputs.
Facts
Tested
Its driver works. We have not signed it off on a real board yet.
I2C address
0x6F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E
The Qwiic Button with LED answers at I2C address 0x6F. Its address can be changed in software.
Current
20 mA
The catalog lists a typical draw of 20 mA for the Button, copied from the maker’s description and not measured by Palpable.
Board size
25.4 × 25.4 mm
The Button board measures 25.4 × 25.4 mm and stands 8.1 mm tall with its parts. It has 2 mounting holes. These dimensions are from the maker’s mechanical drawing.
Free to reuse
Every fact here is open data under CC BY 4.0. Copy it into your own docs or code, and credit Palpable. Download it
This record was last changed on October 7, 2026.