Grove OLED Display 0.96" (SSD1315 / SSD1308Z, 128x64)
Seeed's 0.96-inch 128x64 monochrome OLED on Grove — the current SSD1315 board and the earlier SSD1308Z one.
Say it to PAL
“Show a message on the screen.”
The code PAL writes
p.setVariable('display_message', 'Hello!');
p.log('Display updated');“Show a sensor reading on the screen.”
The code PAL writes
p.onSensorChange('qwiic-tmp117', 'temperature', (val) => {
p.setVariable('temp_reading', val);
});
await p.waitUntilStopped();When to pick it
The default display recommendation — the most common, cheapest, and best-supported OLED. Start here unless you have a specific reason to need a larger or grayscale display.
About it
Both Grove 0.96-inch OLEDs sit at 0x3C and speak the SSD1306 command set. The SSD1315 board (104020208) runs from 3.3 V or 5 V with no boost converter; the older SSD1308Z board (V1.1) carries its own DC-DC boost.
Where to buy
Facts
Tested
It is in our catalog, but nobody has checked it on a real board. It may not work yet. Its driver is written, but it has not been tested on hardware yet.
I2C address
The Grove OLED Display 0.96" (SSD1315 / SSD1308Z, 128x64) answers at I2C address 0x3C. Whether the address can be changed is not recorded in this catalog.
Chip
SSD1315
Its display is the Solomon Systech SSD1315.
Free to reuse
Every fact here is open data under CC BY 4.0. Copy it into your own docs or code, and credit Palpable. Download it
This record was last changed on October 29, 2026.