0.96" OLED (on the Seeed Expansion Board Base for XIAO, SSD1315, 128x64)
The 0.96-inch 128x64 screen built into the Seeed Expansion Board Base for XIAO.
No shop listed yet
About it
A ZJY-2864KSWPG01 0.96-inch 128x64 monochrome OLED module with an SSD1315 controller, soldered onto the Seeed Studio Expansion Board Base for XIAO (103030356) at 0x3C on the same I2C bus as its Grove I2C sockets. It speaks the SSD1306 command set. It is not sold on its own here: it comes with the base.
Where to buy
No shop listed yet.
Facts
Tested
It is in our catalog, but nobody has checked it on a real board. It may not work yet. Its driver is written, but it has not been tested on hardware yet.
I2C address
The 0.96" OLED (on the Seeed Expansion Board Base for XIAO, SSD1315, 128x64) answers at I2C address 0x3C. Whether the address can be changed is not recorded in this catalog.
Chip
SSD1315
Its display is the Solomon Systech SSD1315.
Free to reuse
Every fact here is open data under CC BY 4.0. Copy it into your own docs or code, and credit Palpable. Download it
This record was last changed on October 25, 2026.